| t
| Before removing the lettering, heat it with a hot air blower -V.A.G 1416-. |
| t
| If lettering is removed and reinstalled, only use adhesive remover -D 002 000 10- to remove the adhesive remains. |
| t
| Remove existing adhesive residue of adhesive tape using adhesive strip remover -VAS 6349-. |
| t
| Ensure that the adhesive surfaces are free of dust and grease. |
| t
| The lettering must be bonded in place immediately after cleaning. |
| t
| Remove protective film immediately before installation. |
| t
| Working temperature is approx. 21 ℃. |
| t
| Lettering cannot be removed without damage. |
|
|
|
