| –
| Cut back remaining material on body flange with U-shaped blade -V.A.G 1561/3-, but do not remove completely. |
Note | Remaining material serves as adhesion base for newly applied adhesive sealing compound. Keep bonding surfaces free of dirt and grease. |
WARNING | Activator must not have contact with paint or the paintwork will be damaged. |
|
| Exception: If bonding is not performed immediately after cutting back, the remaining residual material must be activated with activator D 181 801 A1. |
| t
| If the window flange has been repaired or partially renewed, the area concerned must be cleaned and primed again after painting. |
|
|
|
