volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing oil pressure switchF1 > < Checking oil pressure switch
Checking oil pressure
Checking oil pressure
Special tools and workshop equipment required
   
t  Oil pressure tester -V.A.G 1342-
Procedure
l  Oil level OK.
l  Engine oil temperature approx. 80°C
–  Remove oil pressure switch -F1- → Chapter.
–  Connect oil pressure tester -V.A.G 1342- to hole for oil pressure switch -F1-.
–  Screw an old oil pressure switch into hole on oil pressure tester -V.A.G 1342- to seal hole.
–  Start engine.
l  Oil pressure at idling speed: at least 0.8 bar.
l  Increase engine speed further. At 2000 rpm and an oil temperature of 80 °C the oil pressure should be at least 1.5 bar.
At higher engine speeds, the oil pressure must not exceed 5.0 bar. If oil pressure exceeds 5.0 bar:
–  Renew oil pump.
  W00-0516

Removing and installing oil pressure switchF1 > < Checking oil pressure switch