Parts of lubrication system |
Note t
| Finding metal shavings or
a large quantity of small metal particles during engine repair could
indicate that the crankshaft bearings or conrod bearings are damaged.
To avoid any subsequent damage, the following work must be carried
out following the repair: carefully clean oil channels and renew oil
spray jets, engine oil cooler and oil filter |
t
| Oil capacities, oil specifications, viscosity grades → Chapter. |
t
| Oil spray jet and pressure relief valve → Fig. |
Caution Finding metal shavings or a large quantity of small metal
particles during engine repair could indicate that the crankshaft
bearings or conrod bearings are damaged. To prevent this from causing
further damage, perform the following repairs: |
Thoroughly clean oil channels. |
Renew oil filter element. |
|
|
|
|