When working on fuel supply and injection system, pay careful
attention to the following rules for cleanliness: |
t
| Thoroughly clean all unions and surrounding areas before disconnecting. |
t
| Place removed parts on a clean surface and cover. Use only
lint-free cloths. |
t
| Carefully cover opened components or seal if repairs cannot
be carried out immediately. |
t
| Install clean components only. Do not remove replacement parts
from packing until immediately before installing. Do not use parts
that have not been stored in their packing (e.g. in tool boxes etc.). |
t
| When the system is open: Do not work with compressed air. The
vehicle should not be moved. |
t
| Also ensure that no diesel fuel comes into contact with the
coolant hoses. Should this occur, the hoses must be cleaned immediately.
Damaged hoses must be renewed. |
|
|
|