Polo Mk5
| Assembly overview - suspension strut |
| 1 - | Cap |
| q | Allocation → Electronic parts catalogue “ETKA”. |
| 2 - | Nut |
| q | 60 Nm |
| q | Self-locking. |
| q | Always renew after removing. |
| 3 - | Stop |
| 4 - | Suspension strut turret |
| 5 - | Nut |
| q | 60 Nm |
| q | Self-locking. |
| q | Always renew after removing. |
| 6 - | Suspension strut mounting |
| q | Note correct installation position → Fig. |
| 7 - | Deep groove ball thrust bearing |
| 8 - | Spring plate |
| 9 - | Coil spring |
| q | Removing and installing → Chapter. |
| q | Observe colour coding |
| q | Allocation → Electronic parts catalogue “ETKA”. |
| Spring allocation via PR No. |
| These numbers are located on the vehicle data sticker. |
| q | Surface of coil must not be damaged. |
| 10 - | Protective sleeve |
| 11 - | Bump stop |
| 12 - | Shock absorber |
| q | Can be renewed separately. |
| q | Allocation → Electronic parts catalogue “ETKA”. |
|
|