Polo Mk5
| Assembly overview |
| 1 - | Securing bolts of voltage regulator |
| 2 - | Hexagon head flange bolts |
| q | For securing protective cap |
| 3 - | Battery positive wire |
| 4 - | Hexagon flange nut |
| q | M8 |
| q | 15 Nm |
| 5 - | Protective cap |
| 6 - | Protective cap |
| 7 - | Protective cap |
| 8 - | Voltage regulator |
| q | Removing and installing voltage regulator → Chapter |
| 9 - | Alternator |
| q | Removing and installing alternator → Chapter |
| q | Removing and installing poly V-belt pulley on alternator → Chapter |
| q | Checking alternator → Chapter |
| 10 - | Belt pulley |
| q | 75 Nm |
| 11 - | Hexagon head flange bolts |
| q | M8 |
| q | 25 Nm |
| - - | Specified torques (not illustrated) |
| q | M8 securing bolt for tensioning element, 20 Nm + 1/4 turn (90°) further. |
| q | M8 securing bolt for air conditioner compressor, 25 Nm (pay attention to guide and spacer sleeves) |
