| Onboard supply control unit -J519- |
| The onboard supply control unit -J519- has the following equipment-specific functions in the vehicle: |
| t
| Adapting acoustic feedback when unlocking |
| t
| Adapting acoustic feedback when locking |
| t
| Activating and deactivating lane change flash |
| t
| Adapting automatic unlocking on removing ignition key |
| t
| Adapting automatic locking at 15 km/h |
| t
| Adapting automatic locking of rear lid at 5 km/h |
| t
| Activate/deactivate parking light on both sides |
| t
| Adapting turn signal cycles of lane change flash |
| t
| Coding onboard supply control unit |
| t
| Adapting unlocking of individual doors |
| t
| Adapting sensitivity of interior monitoring |
| t
| Adapting sensitivity of inclination sensor |
| t
| Deactivating Factory mode |
| t
| Adapting rear window convenience wipe |
| t
| Confirming convenience closing with flashing lights |
| t
| Adapting country setting for intelligent alarm horn |
| t
| Reading measured values of convenience onboard supply control unit |
| t
| Reading measured values of central electrics onboard supply control unit |
| t
| Adapting switch-off delay of interior light |
| t
| Activating and deactivating emergency brake flashing lights |
| t
| Activating and deactivating hazard warning lights. |
| t
| Adapting visual feedback when locking/unlocking |
| t
| Activating and deactivating parking light |
| t
| Coding rain/light sensor |
| t
| Adapting switching time of exterior mirror heating |
| t
| Adapting switching time of windscreen heating |
| t
| Adapting switching time of rear window heating |
| t
| Adapting headlight washer system |
| t
| Adapting remote control key |
| t
| Checking remote control unit key |
| t
| Activating and deactivating service position of windscreen wiper |
| t
| Adapting horn on term. 15 |
| t
| Deactivating side lights on term. 15 |
| t
| Onboard supply control unit final control diagnosis |
| t
| Activating and deactivating second wipe |
Note | It depends on the fitted optional equipment whether or not the above-mentioned adaptations can be carried out. |
| Fault detection and fault display: |
| The onboard supply control unit -J519- features self-diagnosis to facilitate fault finding. |
| For fault finding, use vehicle diagnosis, testing and information system -VAS 5051A- in „Guided fault finding“ mode. |
|
|
|
