| Trailer detector control unit -J345- |
| The trailer detection control unit -J345- is located behind the right side panel trim in the luggage compartment. |
Note | The trailer detection control unit -J345- only detects „Trailer operation“ as of a power decrease of at least 5 W → Remark. It passes this information on to diverse control units via the CAN data bus. |
| The trailer detector control unit -J345- is supplied with information (light control) from the onboard supply control unit -J519- and convenience system central control unit -J393- via the CAN data bus. |
| 1)
| „Trailer operation“ can only be detected if at least turn signal indicators or side marker lights are switched on. |
| Fault detection and fault display: |
| The trailer detector control unit -J345- features self-diagnosis to facilitate fault finding. |
| To localise faults, refer to chapter entitled „Vehicle diagnosis, testing and information system“ and use „Guided fault finding“ function. |
Note | For checking control unit, use socket tester -V.A.G 1537/A- or trailer socket tester -VAS 5800-. |
| Special tools and workshop equipment required |
|
|
|
