R32 4Motion V6-3.2L (CBRA) (2008)
-
Disconnect electrical connection at side trim - arrows - then remove side trim completely.
-
Disengage electrical connection lock - arrows - and disconnect.
-
Drill out rivets - arrows - and remove loudspeaker from side panel.
NOTE: To prevent corrosion, ensure that all metal particles from drilling are removed from vehicle interior.
Installing
Install in reverse order of removal, noting the following:
-
Secure new loudspeaker with special pop rivets of suitable length and diameter.
Front Mid-Range Speakers
Front Mid-Range Speakers
NOTE:
-
Midrange speakers are secured to door trim from behind.
-
Removal and installation of left or right side speakers is identical.
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
Remove applicable door trim.
