R32 4Motion V6-3.2L (CBRA) (2008)
-
Disengage electrical connection lock - arrows - and disconnect.
-
Cut off heat-sealed plastic clips on loudspeaker panel - arrows -.
-
Remove panel with loudspeaker together from door trim.
Installing
-
Install loudspeaker panel together with loudspeaker into door trim.
-
Heat-stake the plastic clips using soldering iron - arrows -.
Remaining installation in reverse order of removal.
Rear Treble Speakers, 2 Door
Rear Treble Speakers, 2 Door
NOTE:
-
Removal and installation of left or right side speakers is identical.
-
After removing treble speaker, speaker trim must always be replaced.
-
Treble speakers are secured to side trim from behind.
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
When removing side trim in next step, treble speaker may break away from trim due to a short wire connection from wire mount to
speaker connection. Heed cable length and carefully remove side trim.
