R32 4Motion V6-3.2L (CBRA) (2008)
/Page-1796001.png)
Trunk / Liftgate Latch: Service and Repair
Rear Lid Latch Bracket
Rear Lid Latch Bracket
Removing
-
Remove lock carrier.
-
Remove screws - 1 - and striker pin.
Installing
-
Assemble the latch bracket - 2 -.
-
Tightening specification for bolts - 1 - : 23 Nm.
-
Adjust latch bracket
Further installation is in reverse order of removal.