R32 4Motion V6-3.2L (CBRA) (2008)
Sunroof / Moonroof Weatherstrip: Adjustments
Panel Seal, Adjusting
-
Using a strip of cardboard about 0.3 mm thick (e.g. business card), check if pretension between panel seal - 2 - and body is even all around.
Cardboard should slide through gap with firm resistance.
-
Sunroof Glass Panel, Removing
-
If pretension is insufficient, the panel seal - 2 - can be pressed open using a trim removal wedge 3409 - 1 -.
-
If the pretension is excessive, press the panel seal - 1 - closed around circumference using application roller 3356 .
