R32 4Motion V6-3.2L (CBRA) (2008)
Fuel Filter: Service and Repair
Fuel Filter
Fuel Filter
Special tools, testers and auxiliary items required
-
Fuel container
Removing
-
Place container underneath fuel filter.
CAUTION: Fuel system is under pressure. Wear protective goggles and protective clothing to prevent injuries and contact with skin.
Before removing from hose connection wrap a cloth around the connection. Then release pressure by carefully pulling hose off
connection.
-
Disconnect fuel lines - 1 -, - 2 - and - 3 - by pressing the release button.
-
Remove bolts - 4 -.
-
Remove fuel filter.
Installing
Installation is performed in the reverse order of removal, noting the following:
-
The direction of flow is marked on filter housing with arrows.
-
Bleed fuel supply system.
Installed Location
Pin - 2 - on filter housing must engage in recess of guide - 1 - on filter bracket
Tightening Specifications
Component
Nm
Screw clip for fuel filter
3 Nm
