R32 4Motion V6-3.2L (CBRA) (2008)
-
Remove mounting nuts - arrows - of E-box bracket - 1 -.
NOTE: It depends on vehicle equipment whether an auxiliary relay carrier is installed.
-
Pull E-box bracket - 1 - as far as cable lengths permit from upward stud bolts.
-
Unclip auxiliary relay carrier - 1 - sideways out of E-box bracket - 2 -.
-
Remove E-box bracket - 2 - from vehicle.
Installing:
Install in reverse order of removal, noting the following:
-
Reconnect wires - 1 - to E-box in allocation marked during removal.
-
Tighten all threaded connections to the specification
Vehicles through 05.04:
