R32 4Motion V6-3.2L (CBRA) (2008)
Body Control Module: Programming and Relearning
Comfort System Central Control Module J393, Adaptation
Comfort System Central Control Module, Adapting
The following functions can be adapted:
-
Activating and deactivating "single door opening" x-95tilsaodxb
-
Activating or deactivating "automatic locking of all doors and rear lid at >15 km/h" x- 95tilsaodxb
-
Activating and deactivating "automatic unlocking when removing ignition key" x- 95tilsaodxb
-
"Unlock return message via access/start authorization"
-
"Unlock return message via radio remote control"
-
"Unlock return message via key switch"
-
"Return message lock via access/start authorization"
-
"Return message for locking via radio remote control"
-
"Return message for locking via key switch"
-
"Return message for ATWS activated"
-
"Country selection for the intelligent alarm horn"
-
"Sensitivity of inclination sensor"
-
"Sensitivity of interior monitoring"
-
Activating and deactivating "battery monitoring (sounder)"
-
Activating and deactivating "comfort operation via radio-frequency remote control"
-
Activating and deactivating "anti-theft warning system - alarm delay when opening driver door"
-
Activating and deactivating "automatic rear lid locking at >7 Km/h"
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051A
-
Using a vehicle diagnosis, testing and information system, rather only directly via steering column switch in instrument cluster via the Basic
setting, main menu, settings and comfort functions.
-
In Vehicle Diagnostic, Testing and Information System VAS 5051A, select operating mode "Guided Fault Finding".
-
Body
-
Body repair procedures
-
01 - On Board Diagnostic (OBD) capable systems
-
Comfort system
-
Functions - central control module for comfort system
-
Adapting Comfort System Central Control Module -J393-
Comfort System Central Control Module J393, Coding
Comfort System Central Control Module, Coding
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051A
-
In Vehicle Diagnostic, Testing and Information System VAS 5051A, select operating mode "Guided Fault Finding".
-
Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
-
Body
-
Body repair procedures
-
01 - On Board Diagnostic (OBD) capable systems
-
Comfort system
-
Functions - central control module for comfort system
-
Coding Comfort System Central Control Module -J393-
