R32 4Motion V6-3.2L (CBRA) (2008)
Seals and Gaskets: Service and Repair
Right Flange Shaft Seal on Outside of Bevel Box
Right Flange Shaft Seal on Outside of Bevel Box (All Wheel Drive) - 02E, 6 Speed DSG A/T AWD
Special tools, testers and auxiliary items required
^
Thrust piece T10049
Procedure
Sealing ring can be replaced with transmission installed.
-
Remove right flange shaft.
-
Pry out seal for flange shaft with lever.
-
Drive in new seal to stop using thrust piece T10049.
-
Fill area between sealing lip and dust lip -arrow- halfway with sealing grease G 052 128 A1.
-
Install right flange shaft.
-
Check oil level in bevel box and top off.
