Rabbit L5-2.5L (BGP) (2006)
Amplifier: Service and Repair
Amplifier R12, Removing And Installing
Component view:
Removing:
From 06.06 production, Amplifier R12 is installed under drivers seat.
-
Move drivers seat to uppermost and rearmost position.
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Unclip lower seat trim -arrow-.
-
Remove bolts -arrows-.
-
Remove control module from the locating fixture under seat. Remove far enough until electrical connections are accessible.