Rabbit L5-2.5L (BGP) (2006)
NOTE: The number of electrical connections depends on vehicle equipment level and market version.
-
Remove the nuts -arrows-.
-
Remove bracket with Comfort System Central Control Module J393.
-
Pull retaining tab -1- in - direction of arrow B - and slide Comfort System Central Control Module J393 -2- out of bracket in - direction of arrow A
-.
Installing:
Install in reverse order of removal, noting the following:
NOTE: After installing a new Comfort System Central Control Module, it must be coded.
-
Harness connectors can only be connected and engaged when recesses -arrows- of harness connectors and bracket stand exactly over each
other.
Comfort System Central Control Module J393, coding
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051A.
-
In Vehicle Diagnostic, Testing and Information System VAS 5051A, select operating mode "Guided Fault Finding".
-
Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
-
Body
-
Body repair procedures
-
01 - On Board Diagnostic (OBD) capable systems