Rabbit L5-2.5L (BGP) (2006)
-
Light the inner part of door using a flashlight for better view.
-
Hook assembly tool T 10118 into spring - arrow A -.
-
Engage spring into door lock by pulling assembly tool T 10118 - arrow B -.
Release lever is now locked in position.
NOTE: Lock is secured by engaging spring in the operating lever. This prevents the cable from subsequently being clipped in at door handle
incorrectly.
-
Swivel door handle - 1 - into door.
-
Pull clip - 2 - into plate cutout and engage clip into door handle - 1 - - arrow -.
NOTE:
-
During installation, door handle - 1 - must be pressed onto door plate.
-
Clip - 2 - must engage into door handle - 1 - with a very audibly click.
Install housing.
-
Then a function test must be performed with door open, since the door cannot be opened if hood release cable is not correctly adjustment or
clipped in.