Rabbit L5-2.5L (BGP) (2006)
Rear Door Window Regulator: Service and Repair
Window Regulator Motor, Removing and Installing
Window Regulator Motor, Removing And Installing
NOTE:
-
Removing and installing is described only for the right window regulator motor. Removing and installing the left window regulator motor is
derived accordingly from this.
-
Window regulator motor should also be removed with mounting plate with outer door plate removed.
Removing
-
Remove door trim.
-
Fix window using adhesive tape so that it does not slip down.
-
Remove the three bolts - 2 -.
-
Disconnect connector - 1 -.
-
Remove window regulator motor with control module - 3 - from mounting plate.
Installing