Rabbit L5-2.5L (BGP) (2006)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Rear Lid Trim, Removing and Installing
Rear Lid Trim, Removing And Installing
Removing
-
Remove two screws - 1 - from handle recess (2 Nm).
-
Remove trim from mounts in rear lid using disassembly pliers 3392. Start from lower edge of rear lid.
-
Remove rear lid trim - 2 - on both sides from window frame trim - 3 -.
-
Remove trim in centering pin area - 4 - and - 5 - from mounts in rear lid.