Rabbit L5-2.5L (BGP) (2006)
Installing
-
Installation is performed in the reverse order of removal.
NOTE: Before installing, check securing clips for damage and replace if necessary.
Luggage Compartment Side Trim, Removing and Installing
Luggage Compartment Side Trim, Removing And Installing
NOTE: Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the
same manner.
Removing
-
Switch off ignition.
-
Remove floor covering from vehicle.
2-door vehicles
-
Remove upper B-pillar trim. Belt anchor or belt anchor rail do not need to be removed from front seat belt.
-
Remove seat bench.
-
Remove backrest.
-
Remove side trim.
4-door vehicles
-
Remove seat bench.
-
Remove 4-door side upholstery:
-
With rear side airbags.
-
Without rear side airbags.
All vehicles
-
Remove rear lock carrier cover.
-
Remove luggage compartment cover side compartment.
-
Remove the two bolts - 1 - (8 Nm) and remove the anchor point - 2 -.