Rabbit L5-2.5L (BGP) (2006)
Installing
-
Installation is performed in the reverse order of removal.
Wheel Housing Trim, (4-Door Vehicles Without Rear Side Airbag 06/2005 ), Removing and Installing
Wheel Housing Trim, (4-door Vehicles Without Rear Side Airbag 06/2005 --> ), Removing And Installing
NOTE: Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the
same manner.
Removing
-
Remove seat bench.
-
Fold backrest forward.
-
Remove cover cap - 1 - from wheel housing trim - 2 -.
-
Remove the two bolts - 1 - (1.5 Nm).
-
Remove nut - 1 - (3.5 Nm).
-
Loosen trim in center from door seal molding - arrow A -.
-
Loosen upper area of trim - arrow B - from mount.
-
Remove trim from window flange - 2 -.
-
Loosen trim in lower area - arrow C - from mountings.