Rabbit L5-2.5L (BGP) (2006)
-
Disengage hood release cable in coupling
-
In vehicles with charge air cooler, disconnect pressure hoses.
-
Remove signal horn - 4 - with bracket from longmember at right side
-
Unscrew bolts - 3 - at left and right longmembers.
-
Screw in guide rod T 10093 at left and right longmembers.
-
Remove bolts - 2 - at left and right on top of lock carrier - 1 -.
-
Lock carrier - 1 - can be pulled toward front approx. 10 cm on guide rod T 10093.
Resetting service position
Installation is performed in the reverse order of removal.
-
Center lock carrier on side rails and between fenders.
NOTE:
-
Make sure that pressure hoses for charge air cooler are re-engaged correctly.
-
Hoses and lines must not be pinched.
Releasing pressure hoses
-
Disengage connector coupling - 1 - and disconnect pressure hose - 2 - in - direction of arrow - from coupling.
-
When re-connecting pressure hoses, make sure that connector couplings engage audibly.