Rabbit L5-2.5L (BGP) (2006)
^
Clean if re-using
11. Bolt
12. Bracket
13. Wheel bearing housing
^
With fastened brake carrier
14. ABS wheel speed sensor
Before inserting sensor, clean inner surface of bore hole and coat with hot bolt paste G 052 112 A3
15. Hex socket head bolt, 8 Nm
16. Cover plate
17. Hex head/Torx bolt, 12 Nm
^
Hex head bolt M6x10 changed from Torx bolt M6x12
^
Replace hex head bolt with hex head bolt and Torx bolt with Torx bolt
18. Wheel bearing/hub unit
^
The ABS sensor ring is installed in wheel bearing
Assembly overview FN3 16 inch:
1. Torx bolt, 12 Nm
2. Brake disc
^
Internally vented, dia. 312 mm
^
Thickness 25 mm
^
Wear limit: 22 mm
^
Must always be replaced together on both sides of axle
^
Remove brake caliper before removing