Rabbit L5-2.5L (BGP) (2006)
/Page-1492010.png)
6. Retaining spring
^
Insert in brake pad retaining spring and press below brake carrier.
7. Ribbed bolt, 190 Nm
^
Clean if re-using
8. Brake pads
^
Thickness 14 mm without backing plate
^
With wear indicator
^
When wear limit is reached (limit: approximately 4 mm), the warning lamp lights up in instrument cluster
^
Wear limit: 2 mm without backing plate
^
Must always be replaced together on both sides of axle
9. Brake caliper
^
Do not bolt to brake hose/brake line when changing brake pads
^
Must not be removed
10. Guide pins, 30 Nm (18 ft lb)
11. Concealment cap
^
Remove
12. Washer
13. Vibration damper
14. Bolt, 10 Nm
15. Dust cap
16. Bracket
17. Bolt, 15 Nm
18. Brake line, 14 Nm
19. Brake hose
20. Hex socket head bolt, 8 Nm
21. Bracket
22. Spring clamp
Brake Caliper, Removing and Installing
Brake caliper, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331
