Rabbit L5-2.5L (BGP) (2006)
^
Check brake fluid level.
Front Brakes, Servicing, FNR-G Brake Caliper
Front brakes, servicing, FNR-G brake caliper
Note:
^
After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
^
Use brake filler bleeder unit VAS 5234 or extraction device V.A.G. 1869/4 to extract brake fluid from brake fluid reservoir.
^
Before removing brake caliper or disconnecting brake hose, Brake Pedal Actuator V.A.G. 1869/2 must be inserted (this dissipates pressure).
1. Cover plate
2. Torx bolt, 12 Nm
3. Brake disc
^
Internally vented, dia. 345 mm
^
Thickness 30 mm
^
Wear limit: 27 mm
^
Must always be replaced together on both sides of axle
^
Remove brake caliper before removing
4. Torx bolt, 4 Nm
5. Brake carrier
^
Bolt to wheel bearing housing