Rabbit L5-2.5L (BGP) (2006)
-
Install wheels.
Note:
^
Before moving vehicle, depress brake pedal several times firmly to properly seat brake pads in their normal operating position.
^
Check brake fluid level.
CII 38
Brake caliper, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331
^
Brake Pedal Actuator V.A.G 1869/2
Brake caliper, removing
Work procedure applies only for replacing or when performing subsequent service work on brake caliper.
-
Remove wheels.
-
Unhook brake cable from lever on brake caliper.
-
Remove spring clip and pull brake cable from holder on brake caliper.
-
Connect bleeder hose of bleeder bottle to bleeder valve of brake caliper and then open bleeder valve.
-
Insert Brake Pedal Actuator V.A.G 1869/2.
-
Close bleeder valve and remove bleeder bottle.
-
Remove brake line.