Rabbit L5-2.5L (BGP) (2006)
-
Press protective cap with assembly tool - 1 - and piston resetting tool - 2 - into brake caliper so that it contacts the brake caliper all around.
Check seating of protective caps:
-
Protective cap must no longer be able to be pulled from brake caliper by hand.
-
Press piston lightly against protective cap and lock it into position, e.g. with trim removal wedge - 2 -.
Do not angle piston, to avoid damaging seal sleeve.
-
Blow protective cap on with pressurized air (max. 3 bar) - 1 -. Protective cap springs on to piston.
-
Press piston into brake caliper using piston resetting tool - 1 -.