Rabbit L5-2.5L (BGP) (2006)
1. Brake caliper with parking brake cable lever
^
Replace brake caliper if leaking at parking brake cable lever
2. Dust cap
3. Bleed valve, 10 Nm
^
Apply a thin coat of assembly paste G 052 150 A2 to threads before installing.
4. Hex bolt, self-locking, 35 Nm
^
Replace
^
When loosening and tightening, counter-hold at guide pin
5. Guide pins
^
Grease before pulling on protective cap
6. Protective cap
^
Pull onto brake carrier and guide pin
7. Brake carrier with guide pins and protective cap
^
CII 38 brake illustration
^
Supplied as pre-assembled replacement part with sufficient grease on guide pins
^
If protective caps or guide pins are damaged, install repair kit. Use supplied grease packet to lubricate guide pins.
8. Protective cap
^
Pull onto piston with outer sealing lip
9. Piston with automatic adjustment
^
Apply thin coat of assembly paste G 052 150 A2 to piston before inserting
10. Sealing ring
CII 41 brake assembly overview:
15 inch from KW 32/04