Rabbit L5-2.5L (BGP) (2006)
-
Remove intake air connection on lock carrier - arrows -.
Note:
^
To prevent damage to condenser and also to the refrigerant lines/hoses, ensure that the pipes and hoses are not stretched, kinked or bent.
-
Remove bolts - 1 - from radiator bearings.
-
Swing radiator slightly toward rear.
-
Remove condenser mounting bolts - 2 -.
-
Remove bolt - arrow - for mount of refrigerant line.
-
Take radiator up and out.
Installing
Installation is in reverse order of removal. Note the following:
^
Replace coolant if a new radiator was installed.
^
Fill with coolant.
Tightening torques