Rabbit L5-2.5L (BGP) (2006)
-
Open cover - 1 - of E-box and remove wire - 2 -.
-
Remove bolts - arrows - and remove battery holder from vehicle.
CAUTION: Hot steam may escape when opening expansion tank. Wear protective goggles and protective clothing to prevent damage to eyes
and scalding. Cover cap with a rag and open very carefully.
-
Drain coolant.
-
Remove air guide on lock carrier - arrows -.
-
Remove intake hose - 4 -. To do so, disconnect air hoses - 1 - and - 2 - (compress securing ring) and remove spring clamp - 3 -.
-
Remove front and rear sections of right front wheel housing liner.
-
Remove ribbed belt for generator and coolant pump.