Rabbit L5-2.5L (BGP) (2006)
Catalytic Converter: Service and Repair
Front Exhaust Pipe With Catalytic Converter, Removing and Installing
Front Exhaust Pipe With Catalytic Converter, Removing And Installing
Special tools, testers and auxiliary items required
-
Torque wrench V.A.G 1331
-
Hot bolt paste
Removing
-
Remove right underbody trim - arrows - .
Engine code BGP
-
Unclip wire - arrow - , pull off bracket - 1 - and disconnect harness connector - 2 - for Oxygen Sensor (O2S) Behind Three Way Catalytic
Converter (TWC) G130 .
Engine code BGQ