Rabbit L5-2.5L (BGP) (2006)
Catalytic Converter: Locations
Front Exhaust Pipe With Catalytic Converter And Attachments (Engine Code: BGP), Assembly Overview
1
-
Exhaust manifold
-
Coat stud bolts with hot bolt paste
2
-
Gasket
-
Replace
-
Note installation position:
-
Gasket recess - arrow A - must be located at exhaust manifold recess - arrow B - .
3
-
25 Nm
-
Replace
4
-
Front exhaust pipe
-
With catalytic converter
-
Protect from shocks and impact stress
-
With flex joint
-
Flex joint must not be bent more than 10 degrees - otherwise it may be damaged
-
Install exhaust system free of stress.
5
-
Clamp
-
Before tightening, ensure exhaust system is tension-free.
-
Installed location
-
Tighten bolts evenly
6
-
25 Nm
7
-
23 Nm
8
-
Front cross member
9
-
Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130
-
55 Nm
-
Only use hot bolt paste to grease thread; do not let paste get onto slits of oxygen sensor body
10
-
Connector
-
Brown, 4-pin
-
Installed location
11
-
25 Nm
12
-
Suspended mount