Rabbit L5-2.5L (BGP) (2006)
Compressor Pulley: Locations
Ribbed Belt Pulley - "Denso" A/C Compressor, Assembly Overview
NOTE:
-
This type of ribbed belt pulley is installed on "7SEU17C" A/C compressor.
-
Different versions of the ribbed belt pulley may be installed, depending on A/C compressor construction type and engine version Parts Catalog
-
Ribbed belt pulley, removing and installing
1. Cover cap
2. Circlip
-
Remove carefully using a small screwdriver or needle-nose pliers (pay special attention to ribbed belt pulley when doing this)
3. Guide cage
4. Circlip
-
always replace
-
install on correct side (flat side toward A/C compressor)
5. Spacer
6. Ribbed belt pulley
-
the ribbed belt pulley is made of plastics and is sensitive to impact, be especially careful when handling it
-
different versions Parts Catalog
7. Air conditioner compressor
-
depending on engine and market version, different versions may be installed Parts Catalog
-
Clean A/C compressor flange before sliding on ribbed belt pulley.
8. Rubber element
-
Qty. 6
-
decouples ribbed belt pulley from A/C compressor input shaft, dampers vibration and noise
-
for installation, lightly coat damper, e.g. with tire mounting paste or a soap solution (as a lubricant)