Rabbit L5-2.5L (BGP) (2006)
Installing
-
Installation is performed in the reverse order of removal.
Instrument Panel Center Vent, Removing and Installing (Vehicles With Climatronic)
Instrument Panel Center Vent, Removing And Installing (vehicles With Climatronic)
Removing
-
Switch off ignition.
-
Pry sensor - 1 - out of indirect ventilation - 2 - using trim removal wedge 3409.
-
Disconnect wiring harness from sunlight photo sensor.
-
Remove bolt - 3 - (1.5 Nm).
NOTE: To provide a better overview, components are shown removed in the following illustration.
-
Insert two trim removal wedges 3409 as shown in seam between indirection ventilation 1 - and vent - 2 -.