Rabbit L5-2.5L (BGP) (2006)
Brake Light Switch: Service and Repair
Brake Light Switch F From KW 45/05, Removing and Installing
Brake Light Switch F from KW 45/05, removing and installing
On vehicles before KW 45/05, brake light switch was located on brake pedal.
Removing
-
Remove engine cover.
-
On some vehicles, intake hose must be removed.
-
Disconnect connector - 1 - from Brake Light Switch F.
-
Remove bolt - 2 - from brake master cylinder.
-
Remove Brake Light Switch F - 3 - downward and off from brake master cylinder and remove it from the retaining tab at top - 4 -.
Installing
-
Installation is in reverse order of removal.