Rabbit L5-2.5L (BGP) (2006)
Wheels: Service and Repair
Wheel Centering Seat, Protecting Against Corrosion
Wheel centering seat, protecting against corrosion
Valid for light metal and steel wheels
When replacing wheel, wheel centering seat should be waxed with
Wax spray D 322 000 A2
In order to prevent corrosion between wheel centering seat and wheel.
-
Remove wheel.
-
Always clean wheel centering seat at wheel hub and center of rim.
-
Apply wax in area of centering - arrow - using a brush.
Always make sure that only centering - arrow - is waxed and not rim contact surfaces. Consequences of this would be a soiling of the brakes during
vehicle operation and poor braking performance would result.
CAUTION! Wheel bolts, contact surfaces of wheel/wheel hub and threads in wheel hub must not be waxed. Threads of wheel bolts must
never be handled with grease or corrosion protection agents!
-
Install wheel and tighten.