Rabbit L5-2.5L (BGP) (2006)
Fuel Injector: Service and Repair
Fuel Injectors, Removing and Installing
Fuel Injectors, Removing And Installing
Removing
NOTE:
-
Observe safety precautions.
-
Observe the rules for cleanliness.
-
Check whether a coded radio is installed. If necessary, obtain the anti-theft coding.
-
Disconnect battery.
-
Remove engine cover with air filter.
CAUTION: Fuel supply line is under pressure: Wear protective goggles and protective clothing to prevent injuries and contact with skin.
Before loosening the fuel lines, place a rag around the connection point. Then release pressure by carefully pulling hose off connection.
-
Disconnect vent line - 2 - and fuel supply line - 3 -. Press in securing ring to disengage lines.
-
Disconnect connectors -1 -, - 2 - and - 6 -.
-
Remove wiring harness - 3 - from transport strap.
-
Pull clamps - 4 - and retaining ring - 5 - out of locking mechanism.
-
Remove bolts - 7 - and remove transport strap.
-
Remove bolts -1 - and pull fuel rail with fuel injectors evenly out of intake manifold.
-
Seal or cover openings in intake manifold.