Rabbit L5-2.5L (BGP) (2006)
Ignition Coil: Service and Repair
Ignition Coils With Power Output Stage, Removing And Installing
Special tools, testers and auxiliary items required
-
Puller T40039
Removing
-
Remove engine cover with air filter.
-
If present, disconnect harness connector from Secondary Air Injection (AIR) Solenoid Valve N112 - arrow - .
In order to prevent damage to cable guide, remove ignition coils with power output stage as follows:
-
Using puller T40039 , pull all ignition coils only approx. 10 mm out of spark plug shaft, starting with ignition coil - 1 - .
-
Then, pull out all ignition coils further 10 mm in same sequence.
-
Release all of connectors and pull them off only slightly.