Rabbit L5-2.5L (BGP) (2006)
NOTE: Electrical connections can only be disengaged and disconnected when recesses -arrows- are lined up.
-
Release and disconnect electrical connections from Comfort System Central Control Module J393.
NOTE: The number of electrical connections depends on vehicle equipment level and market version.
-
Remove nuts -arrows-.
-
Remove bracket with Comfort System Central Control Module J393.
-
Pull retaining tab -1- in direction of -arrow B- and slide module -2- from bracket in direction of -arrow A-.
Installing:
Install in reverse order of removal, noting the following:
NOTE:
-
After installing a new Comfort System Central Control Module, it must be coded.
-