Rabbit L5-2.5L (BGP) (2006)
Air Filter Element: Service and Repair
Engine Cover With Air Filter, Removing and Installing
Engine Cover With Air Filter, Removing And Installing
Removing
-
Disconnect connector -1 - and intake hose - 2 -.
-
Remove screws - 3 - and disconnect intake hose.
-
Pull engine cover with a jerk out of mount first at front - arrow 1 -, then at right rear -arrow 2 - and finally at left rear - arrow 3 -.
-
Carefully swivel engine cover out of rear area.
Installing
-
Position engine cover correctly in mounts and press in by hand.
The rest of installation follows reverse order of removal procedures.