Rabbit L5-2.5L (BGP) (2006)
Compression Check: Testing and Inspection
Compression pressures, checking
Special tools, testers and auxiliary items required
^
Spark plug removal tool 3122 B
^
Puller T40039
^
Torque wrench V.A.G 1331
^
Compression tester V.A.G 1763
^
Adapter V.A.G 1381/5A
Test conditions:
^
Engine oil temperature must be at least 30° C.
^
Voltage supply OK.
-
Remove engine cover with air filter.
-
Remove fuel injector voltage supply fuse from fuse holder.
-
Fuse assignment.
Note:
^
By removing fuse, voltage supply to fuel injectors is interrupted.
-
Remove ignition coils with power output stage.
-
Remove spark plugs using spark plug removal tool 3122 B.
-
Check compression using compression tester V.A.G 1763 and adapter V.A.G 1381/5A.
Note:
^
Using tester Operating Instructions.
-
Have a second technician operate starter.
-
Operate starter until tester shows no further pressure increase.
Compression pressure: