Rabbit L5-2.5L (BGP) (2006)
Fuel Filter: Service and Repair
Fuel Filter, Removing and Installing
Fuel Filter, Removing And Installing
Special Tools, Testers And Auxiliary Items Required
-
Fuel container
Removing
NOTE:
-
Observe safety precautions.
-
Observe rules for cleanliness.
-
Place container underneath fuel filter.
CAUTION: Fuel supply line is under pressure. Wear protective goggles and protective clothing to prevent injuries and contact with skin.
Before loosening the fuel lines, place a rag around the connection point. Then release pressure by carefully pulling hose off connection.
-
Disconnect fuel lines -1 -, - 2 - and - 3 -, to do so press in securing ring.
-
Remove bolts - 4 -.
-
Remove fuel filter.
Installing
Installation is in reverse order of removal. Note the following:
The direction of flow is marked on filter housing with arrows.
-
Bleed fuel supply system.
Installed location
Pin - 2 - on filter housing must engage in recess of guide -1 - on filter bracket.
Tightening torque:
Component
Nm
Screw clip for fuel filter
3