Rabbit L5-2.5L (BGP) (2006)
Seat Belt Latch: Service and Repair
Belt Latch (2-Door), Removing and Installing
Belt Latch (2-door), Removing And Installing
NOTE: Removal and installation is described for belt latch of left seat. The same instructions apply for removal and installation for belt latch of right
seat.
Removing
-
Remove front seat
-
Position seat as far forward as possible.
-
If present, disconnect wiring harness - 1 - from seat frame.
-
Remove bolt - 2 - (20 Nm).
NOTE:
-
The screw is micro-encapsulated and must be replaced every time it is loosened.
-
Before new bolts are installed, the thread of the corresponding nut must be cleaned.
-
Turn belt latch 90° clockwise - arrow A -.
-
Swivel belt latch toward outside - arrow B -.
-
Remove belt latch from mount in seat rail - arrow C -.
Installing
-
Installation is performed in the reverse order of removal.