Rabbit L5-2.5L (BGP) (2006)
Tires: Removal and Replacement
Tire, removing
-
Turn wheel on tire mounting device so that tire valve/tire pressure sensor - 3 - stands in front of mounting head - 1 -.
CAUTION! Mounting head - 1 - must not be located in area - a - of tire valve/tire pressure sensor, otherwise the mounting head will damage
the tire pressure sensor.
-
Position mounting head - 1 - in vicinity of tire valve/tire pressure sensor so that tire iron can be put on approx. 30° next to tire valve/tire pressure
sensor - 2 -.
-
Install press holders - 3 - on disc wheel opposite the mounting head - 1 -.
-
Now pry tire bead over mounting finger on mounting head using tire iron and remove tire iron again.
-
Let tire mounting device run clockwise until upper bead lies completely above the rim flange.
This slides press holders - 1 - against mounting head. This allows them to be removed again easily.