Rabbit L5-2.5L (BGP) (2006)
Fluid - A/T: Service and Repair
ATF Level, Checking
ATF level, checking 09G, 6 Speed A/T
-
Turn off engine.
The ATF temperature must not be more than approx. 30°C at start of test.
^
Transmission not emergency running, ATF temperature not above approx. 30°C
^
Vehicles is horizontal
^
Selector level at "P"
-
Connect tester and move through selections until it is ready for operation.
-
Press right Guided Functions.
-
Then select vehicle, transmission and Check ATF Level.
-
Press ->.
-
Start engine.
-
Raise vehicle.
-
Place appropriate receptacle underneath transmission.
-
Press ->.
If test temperature: 35°C to 45°C is shown: