Rabbit L5-2.5L (BGP) (2006)
-
Loosen bolts of oil pan - arrows - in diagonal sequence.
-
Remove oil pan together with seal.
Installing
Installation is in reverse order of removal. Not the following:
-
Clean two magnets in oil pan recesses. Ensure that magnets are in full contact with oil pan.
-
Insert oil pan with a new gasket.
-
Make sure oil pan gasket is seated correctly.
-
Lines must not be jammed when installing oil pan.
-
Tighten oil pan bolts - arrows - in diagonal sequence and in stages, tightening torque.
-
Install overflow tube - C -, tightening torque.
-
Replace sealing ring - B - of check plug - A -.