Rabbit L5-2.5L (BGP) (2006)
Transmission Position Switch/Sensor: Service and Repair
Multi-Function Transmission Range (TR) Switch F125, Removing
Multi-Function Transmission Range (TR) Switch F125, removing 09G, 6 Speed A/T
-
Place selector lever in position "N"
-
Switch ignition off.
-
Do not open cooling system.
-
Press selector lever cable lock - 3 - together and pull selector lever cable upward out of bracket.
-
Disconnect selector lever cable - 1 - by hand from lever/selector shaft.
-
Do not bend or kink selector lever cable.
-
Disconnect connector from Multi-Function Transmission Range (TR) Switch F125.
-
Remove nut - 1 -
-
Pull off spring washer - 2 - and lever - 3 - from selector shaft - 4 -.